660SJ HC3
Telescopic Boom Lifts
- Platform Height: 20.10 m / 65.9 ft
- Horizontal Outreach: 17.41 m / 57.1 ft
- Platform Capacity - Restricted: 340 kg / 749.6 lb
- Platform Capacity - Restricted: 454 kg / 1000.9 lb
- Platform Capacity - Unrestricted: 300 kg / 661.4 lb
SEE ALL SPECS
Power Source |
Auxiliary Power | 12 Volts DC |
Capacity - Fuel Tank | 117 L / 30.9 gal. |
Engine Type - Diesel | Deutz TD2.2L3 |
Engine Type - Diesel (LRC) | DEUTZ D2011L04 (DSL) |
Performance Data |
Axle Oscillation | 0.19 m / 0.6 ft |
Drive Speed - 4WD | 6.30 km/h / 3.9 mph |
Gradeability - 4WD | 45 % |
Platform Capacity - Restricted | 340 kg / 749.6 lb |
Platform Capacity - Restricted | 454 kg / 1000.9 lb |
Platform Capacity - Unrestricted | 300 kg / 661.4 lb |
Swing | 360° |
Swing Type | Continuous |
Turning Radius - Outside (2WS) | 5.59 m / 18.3 ft |
Dimensional Data |
Ground Clearance | 0.30 m / 1 ft |
Machine Height | 2.58 m / 8.5 ft |
Machine Length | 10.01 m / 32.8 ft |
Machine Width | 2.29 m / 7.5 ft |
Occupant Capacity | 3 |
Platform Dimension A | 0.91 m / 3 ft |
Platform Dimension B | 2.44 m / 8 ft |
Platform Height | 20.10 m / 65.9 ft |
Tailswing | 1.22 m / 4 ft |
Tyre Size | 355/55D625 Foam Filled |
Wheelbase | 2.50 m / 8.2 ft |
Reach Specifications |
Horizontal Outreach | 17.41 m / 57.1 ft |
Platform Height | 20.10 m / 65.9 ft |
Working Height | 22.10 m / 72.5 ft |
Working Outreach | 18.06 m / 59.3 ft |
General Specifications |
Capacity - Hydraulic Reservoir | 129 L / 34.1 gal. |
Machine Weight | 13282 kg / 29281.8 lb |
Machine Weight | 13282 kg / 29281.8 lb |
Maximum-Ground-Bearing-Pressure | 7.73 Kg/cm2 |
Close
- More Flexibility at Height: With three working zones and enhanced capacity, up to three workers and tools can fit into the platform
- Increased Efficiency: A zero calibration automatic load sensing system eliminates the need to use external weights to calibrate the machine
- Enhanced Operator Experience: An upgraded light panel is more visible in the sun, while a chassis tilt alarm alerts the operator when the machine is on a slope that exceeds 5 degrees
Compare Models