Select Your Region

North America

Latin America

Europe

Middle East

Africa

India

Pacific Rim

Australia and New Zealand

  • Australia and New Zealand
  • English

Troubleshooting Tire Damage

JLG Industries, Inc.
World-leading access equipment manufacturer
____
McConnellsburg, PA

Parts & Service

Troubleshooting Tire Damage

Tech Tips - Jan 18
A common question heard in the JLG call center is, “When should a damaged tire be replaced?” The following is a guideline that will help you make that decision.

Pneumatic tires: If there are any cuts, rips or tears that expose sidewall or tread area cords in the tire, remove the tire from service immediately. Arrangements must be made for replacement of the tire or tire assembly.

Polyurethane foam-filled tires: Remove the tire from service immediately and make arrangements for replacement of the tire or tire assembly when any of the following conditions are discovered:
  • A smooth, even cut through the cord plies which exceeds 3 inches (7.5 cm) in total length
  • Any tears or rips (ragged edges) in the cord plies which exceed 1 inch (2.5 cm) in any direction
  • Any punctures which exceed 1 inch in diameter
  • Any damage to the bead area cords of the tire
If a tire is damaged but is within the above noted criteria, the tire must be inspected on a daily basis to ensure the damage has not propagated beyond the allowable criteria.

Category

Content Type

Case Studies

Blog Posts

Expert Q&A

Tech Tips

White Papers

Videos

Articles

You Might Also Like...