600AJ HC3
Articulating Boom Lifts
- Platform Height: 18.29 m / 60 ft
- Horizontal Outreach: 12.37 m / 40 ft 7 in.
- Platform Capacity - Restricted: 453.59 kg / 1000 lb
- Platform Capacity - Unrestricted: 299.37 kg / 660 lb
SEE ALL SPECS
Power Source |
Auxiliary Power | 12 Volts DC |
Capacity - Fuel Tank | 113.56 L / 30 gal. |
Engine Type - Diesel | DEUTZ D 2.9L Tier 4 Final 49 hp |
Engine Type - Dual Fuel | Ford MSG425 84hp |
Performance Data |
Axle Oscillation | 0.2 m / 8 in. |
Drive Speed - 2WD | 6.84 km/h / 4.3 mph |
Drive Speed - 4WD | 6.84 km/h / 4.3 mph |
Gradeability - 2WD | 30 % |
Gradeability - 4WD | 45 % |
Platform Capacity - Restricted | 453.59 kg / 1000 lb |
Platform Capacity - Restricted | 340.19 kg / 750 lb |
Platform Capacity - Unrestricted | 299.37 kg / 660 lb |
Swing | 360 Degrees |
Swing Type | Continuous |
Turning Radius - Outside (2WS) | 5.16 m / 16 ft 11 in. |
Dimensional Data |
Ground Clearance | 0.29 m / 1 ft |
Deck Width | 130 Degrees |
Machine Height | 2.58 m / 8 ft 6 in. |
Machine Length | 9.14 m / 30 ft |
Machine Width | 2.49 m / 8 ft 2 in. |
Platform Dimension A | 0.91 m / 3 ft |
Platform Dimension B | 2.44 m / 8 ft |
Platform Height | 18.29 m / 60 ft |
Tailswing | 0 m / 0 in. |
Tire Size | IN355/55D-6.25 Low Profile Foam Filled |
Reach Specifications |
Horizontal Jib Rotation | 0 Degrees |
Horizontal Outreach | 12.37 m / 40 ft 7 in. |
Platform Height | 18.29 m / 60 ft |
Up and Over Height | 8.1 m / 26 ft 7 in. |
General Specifications |
Capacity - Hydraulic Reservoir | 115.83 L / 30.6 gal. |
Machine Weight | 11819.26 kg / 26057 lb |
Maximum-Ground-Bearing-Pressure | 6.72 Kg/cm2 / 96 psi |
Close
- More Flexibility at Height: With three working zones and enhanced capacity, up to three workers and tools can fit into the platform
- Increased Efficiency: A zero calibration automatic load sensing system eliminates the need to use external weights to calibrate the machine
- Enhanced Operator Experience: An upgraded light panel is more visible in the sun, while a chassis tilt alarm alerts the operator when the machine is on a slope that exceeds 5 degrees
Compare Models