800AJ HC3
Articulating Boom Lifts
- Platform Height: 24.5 m / 80 ft 4 in.
- Horizontal Outreach: 15.95 m / 52 ft 4 in.
- Platform Capacity - Restricted: 453.59 kg / 1000 lb
- Platform Capacity - Unrestricted: 299.37 kg / 660 lb
SEE ALL SPECS
Power Source |
Auxiliary Power | 12 Volts DC |
Capacity - Fuel Tank | 147.63 L / 39 gal. |
Engine Type - Diesel | DEUTZ TD 2.9L Tier 4 Final 67 hp |
Engine Type - Dual Fuel | Ford MSG425 84hp |
Performance Data |
Axle Oscillation | 0.2 m / 8 in. |
Drive Speed - 2WD | 4.83 km/h / 3 mph |
Drive Speed - 4WD | 4.83 km/h / 3 mph |
Gradeability - 2WD | 30 % |
Gradeability - 4WD | 45 % |
Platform Capacity - Restricted | 453.59 kg / 1000 lb |
Platform Capacity - Restricted | 340.19 kg / 750 lb |
Platform Capacity - Unrestricted | 299.37 kg / 660 lb |
Swing | 360 Degrees |
Swing Type | Continuous |
Turning Radius - Outside (2WS) | 6.56 m / 21 ft 6 in. |
Dimensional Data |
Ground Clearance | 0.28 m / 11 in. |
Deck Width | 130 Degrees |
Machine Height | 2.97 m / 9 ft 9 in. |
Machine Length | 11.22 m / 36 ft 10 in. |
Machine Width | 2.48 m / 8 ft 2 in. |
Platform Dimension A | 0.91 m / 3 ft |
Platform Dimension B | 2.44 m / 8 ft |
Platform Height | 24.5 m / 80 ft 4 in. |
Tailswing | 0.74 m / 2 ft 5 in. |
Tire Size | 18-625 Foam Filled |
Reach Specifications |
Horizontal Jib Rotation | 0 Degrees |
Horizontal Outreach | 15.95 m / 52 ft 4 in. |
Platform Height | 24.5 m / 80 ft 4 in. |
Up and Over Height | 7.91 m / 26 ft |
General Specifications |
Capacity - Hydraulic Reservoir | 151.42 L / 40 gal. |
Machine Weight | 17023.32 kg / 37530 lb |
Maximum-Ground-Bearing-Pressure | 5.32 Kg/cm2 / 76 psi |
Close
- More Flexibility at Height: With three working zones and enhanced capacity, up to three workers and tools can fit into the platform
- Increased Efficiency: A zero calibration automatic load sensing system eliminates the need to use external weights to calibrate the machine
- Enhanced Operator Experience: An upgraded light panel is more visible in the sun, while a chassis tilt alarm alerts the operator when the machine is on a slope that exceeds 5 degrees
Compare Models