800S HC3
Telescopic Boom Lift
- Platform Height: 24.38 m / 80 ft
- Horizontal Outreach: 21.64 m / 71 ft
- Platform Capacity - Restricted: 453.59 kg / 1000 lb
- Platform Capacity - Unrestricted: 226.80 kg / 500 lb
SEE ALL SPECS
| Power Source |
| Auxiliary Power | 12 Volts DC |
| Capacity - Fuel Tank | 117.35 L / 31 gal. |
| Engine Type - Diesel | DEUTZ TD 2.9L Tier 4 Final 67 hp |
| Engine Type - Dual Fuel | Ford MSG425 84hp |
| Performance Data |
| Axle Oscillation | 0.2 m / 8 in. |
| Drive Speed - 2WD | 5.60 km/h / 3.5 mph |
| Drive Speed - 4WD | 5.60 km/h / 3.5 mph |
| Gradeability - 2WD | 25 % |
| Gradeability - 4WD | 45 % |
| Platform Capacity - Restricted | 453.59 kg / 1000 lb |
| Platform Capacity - Restricted | 340.19 kg / 750 lb |
| Platform Capacity - Unrestricted | 226.80 kg / 500 lb |
| Swing | 360 Degrees |
| Swing Type | Continuous |
| Turning Radius - Outside | 5.99 m / 19 ft 8 in. |
| Dimensional Data |
| Ground Clearance | 0.28 m / 11 in. |
| Deck Width | 0 Degrees |
| Machine Height | 3.02 m / 9 ft 11 in. |
| Machine Length | 11.35 m / 37 ft 3 in. |
| Machine Width | 2.49 m / 8 ft 2 in. |
| Platform Dimension A | 0.91 m / 3 ft |
| Platform Dimension B | 2.44 m / 8 ft |
| Platform Height | 24.38 m / 80 ft |
| Tailswing | 1.42 m / 4 ft 8 in. |
| Tire Size | 15-625 Foam Filled |
| Reach Specifications |
| Horizontal Jib Rotation | 0 Degrees |
| Horizontal Outreach | 21.64 m / 71 ft |
| Platform Height | 24.38 m / 80 ft |
| General Specifications |
| Capacity - Hydraulic Reservoir | 181.70 L / 48 gal. |
| Machine Weight | 14982.16 kg / 33030 lb |
| Maximum-Ground-Bearing-Pressure | 5.04 Kg/cm2 / 72 psi |
Close
- More Flexibility at Height: With three working zones and enhanced capacity, up to three workers and tools can fit into the platform
- Increased Efficiency: A zero calibration automatic load sensing system eliminates the need to use external weights to calibrate the machine
- Enhanced Operator Experience: An upgraded light panel is more visible in the sun, while a chassis tilt alarm alerts the operator when the machine is on a slope that exceeds 4 degrees
- Available January 2021
Compare Models